Description
TYPE OF USE
Lubricant specially designed for the last generation of trucks, buses, construction machinery, farm machinery, stationary engines, and boat engines running with low sulfur fuel (≤ 50 ppm). Low emissions turbo Diesel direct injection engines, Euro II, Euro III, Euro IV, Euro V or Euro VI emission regulation compliant, fitted with EGR System (Exhaust Gas Re-circulation) and/or SCR (Selected Catalyst Reduction) system and with or without DPF (Diesel Particulate Filter), working in highly severe conditions of load and service, requiring an engine oil ACEA E9 "Low SAPS" with reduced content of sulfated ash (≤ 1.0%), phosphorus (≤ 0.12 %) and sulfur (≤ 0.4%).
PERFORMANCE
STANDARDS ACEA E7 (E7 replaces E5 and E3) / E9 API CJ-4
APPROVALS MACK EO-O Premium Plus RENAULT VI RLD-3 VOLVO VDS-4
PERFORMANCES CUMMINS CES 20081 DEUTZ DQC-III LA MACK EO-M Plus MAN 3575 MB 228.31 MTU Type 2.1
Low SAPS Technosynthese® lubricant with API CJ-4 standard. Ensures protection and longevity of engines fitted with EGR systems:
- Dispersant and anti-oxidation properties: protection against soot builds up and oil filter plugging.
- Superior Anti-Wear level: bore polishing protection.
- Superior detergent level: piston cleanliness and piston groove deposits control.
- Viscosity grade at cold temperature minimizes wear when engine start up and save fuel compare to a standard viscosity 15W-40.
Standard ACEA E9 is dedicated for lubricants intended for use in truck engines fitted with DPF. Reduced SAPS content enhance DPF lifetime and avoid DPF clogging. Engines compliant with Euro IV, Euro V or Euro VI emission regulation are fitted with sensitive exhaust gas after treatment systems: - Sulfur and Phosphorus inhibit catalytic converters operation and can damage catalytic components: inefficient exhaust gas treatment. - Sulfated Ash clog diesel particulate filters: shorter DPF lifetime and engine power loss.
RECOMMENDATIONS
Drain interval: refer to manufacturers’ recommendations and tune to your own use. Can be mixed with synthetic or mineral oils.
PROPERTIES
| Viscosity grade | SAE J 300 | 10W-40 |
| Density at 20°C (68°F) | ASTM D1298 | 0.863 |
| Viscosity at 40°C (104°F) | ASTM D445 | 97.3 mm2 /s |
| Viscosity at 100°C (212°F) | ASTM D445 | 14.0 mm2 /s |
| Viscosity HTHS at 150°C (302°F) | ASTM D4741 | 3.8 mPa.s |
| Viscosity Index | ASTM D2270 | 147 |
| Flash point | ASTM D92 | 226°C / 439°F |
| Pour point | ASTM D97 | -36°C / -33°F |
| Sulfated ash | ASTM D874 | 0.99% masse |
| TBN | ASTM D2896 | 9.8 mg KOH/g |
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.